The danger of using hand tools in the emergency room is very obvious. But many of these emergency room visits are due to improper use of tools and unsafe work. Properly covered, it will withstand a great deal of adverse conditions. Before working with tools, make sure that you or those who work with the tools are properly trained in the safe use of hand tools. Always teach them how to choose the right tools for the job, how to use each tool properly, and how to determine if the tools need repair. Hand tools are a common part of our lives but can be dangerous if used improperly. Reduce the risk of injury by following the safety tips below.

1. Inspect tools regularly.

Check your tools regularly to make sure they are in good condition. Replace hammers, screwdrivers, or other tools to inspect for cracked, broken, or broken handles. Make sure the tool handles, such as hammers and axes, are firmly in place on the tool. Replace worn jaws on wrenches, pipe tools and pliers.

Keep the cutting tool sharp and cover the sharp edges with a suitable cover to protect the tool and prevent damage from unwanted contact.

2. Take care of your hands

Wear gloves when working with tools, and generally always use appropriate personal protective equipment. Use tools that are designed to keep your wrists straight. Avoid using hand tools with bent wrists.

3. Carry tools carefully

Never lift the tool up the ladder. If you want to lift the tools to a height, use a bag or lift them in the bucket.

Carry tools in and out of the workplace in a secure toolbox.

4. Do not put sharp objects in your pocket

Never carry sharp or pointed tools in your pocket. Instead, carry them in the toolbox.

5. Be aware of your surroundings

When using the tool, always be on the lookout for dangerous people and objects around you.

6. Use the right tools

Always use the right tools for the job. Never use a tool for a purpose other than what is intended. As an example, do not try to use a wrench as a hammer. If you do not use the right tools, you run the risk of damaging the tools and injuring yourself. Replacing tools can increase the likelihood of damage.

7. Follow the instructions

Use the tools only according to the manufacturer’s instructions. Each tool comes with instructions and how to operate it, which should be read before working with them to avoid any hazards.

8.Clean the tools and environment and put the used tools back in place

After using the tool, clean it and return it to a suitable place of storage. Handle tools carefully. Keep them clean and dry and maintain them properly after each use. Keep the work environment clean and tidy to avoid clutter that may cause accidents.

9. Fatty handles are dangerous

Never work with greasy or greasy hands. Slippery hands increase the likelihood of tools slipping and falling, which can be dangerous. Falling from a height can be dangerous for other people as well.

10. Protect your eyes while working

Always use eye protection. Wear safety goggles or face shields for hazards that you may be exposed to while performing various tasks.

11. Observe proper coverage while working

Avoid wearing loose clothing or items that can get stuck in moving parts of the tool, such as jewelry, and wear appropriate clothing to work with the tool. . Use a heavy belt or apron and hang the tools down.

12. Protect yourself from slipping

Keep the floor dry and clean to prevent slipping when working with or around hazardous tools. Fix your foot so that you do not move when working with the tool.

References

https://tengtoolsusa.com/blogs/news/10-basic-safety-rules-for-using-hand-tools

https://www.ccohs.ca/oshanswers/safety_haz/hand_tools/general.html

https://hsi.com/blog/30-tips-for-hand-and-power-tool-safety