Impact wrench

In order to use the impact wrench, know how this device works, what factors cause the device to fail and how to use this device, for this purpose, here are the explanations that will help you use the box body better.

How does the air impact wrench work?

A pneumatic wrench is a power tool that uses compressed air to create mechanical force to open and close nuts and bolts. This tool can open or close a nut or screw by creating air pressure and creating a rapid air flow. Impact wrench’s body is often used in cases where quick and easy replacement of nuts and bolts is required. The tool is connected to a compressed air source via a hose, and by pressing a button or control, you adjust the air flow to loosen or tighten the desired nut or bolt.

What safety issues should be considered when working with an impact wrench?

When working with an impact wrench, you should pay attention to the following:

•     Avoid wearing loose clothing or items such as watches, bracelets, rings, etc., that may get stuck in the tool when using an inflatable tool such as an inflatable box.
•     Protect your hands, eyes and ears by wearing suitable clothing when working with the device.
•     When you are dealing with contaminated materials, use appropriate respiratory protection due to the spread of these materials and their harmfulness.
•     Check the air pressure and adjust the proper air pressure.
•     Check the air hose and keep it away from heat, gas, sharp objects and win. Also check all the connections related to it.
•     When servicing the impact wrench or replacing parts of that device, it must be disconnected from the air source.
•     If any of the parts are damaged or defective, they must be replaced quickly. Always use original equipment parts.
•     Do not use the impact wrench for things it is not suitable for.
•     Do not pull the hose of the device and do not move the device with it.
•     The workplace must be clean and free from any contamination. Check that the work floor is not slippery and use suitable shoes.
•     Do not use a device that is suspected to be broken.
•     Be sure to read the necessary instructions before using the device.
•     Store the device in a suitable place.
•     Prevent the presence of children in the workplace and their handling of dangerous tools.
•     Read all the safety tips related to the use of the device and its manual

What factors cause the failure of the impact wrench?

The impact wrench can be damaged if used incorrectly or if the correct settings are not set. Some of the factors that can lead to the breakdown of these devices can be mentioned:

Improper air pressure: If the air pressure in the device is too high, it may cause the device to break or disrupt the internal system.

Careless use: careless use of the air box wrench without paying attention to the necessary points can cause accidental breaking of parts or damage to the parts of the device.

Use of inappropriate parts: Use of inappropriate replacement parts and accessories in accordance with the technical specifications of the device can lead to the failure of the device.

Failure to replace worn parts: If parts of the device are worn and damaged and are not replaced on time, the possibility of breaking other parts of the device increases.

Improper settings: Improper settings on the device may cause excessive pressure on the parts and cause breakage or failure.

Lack of proper maintenance and repairs: Lack of proper maintenance and repairs can cause the accumulation of particles and pollution in the device, which causes partial or total breakdowns in the long run.

Use in inappropriate environments: Using the device in harsh, dusty environments, or in very high or low temperatures may cause damage.

How to maintaining the air impact wrench?

In order to maintain the device, you should pay attention to the fact that before doing any work such as servicing the device, storing the device, etc., be sure to disconnect the device from its power source first. If the parts of the device are damaged, you must replace them. For better maintenance of the device, it is necessary to observe the following points:

•     Lubricate the machine regularly. For this, you must use special oil and pour a few drops of oil into the air inlets and other parts that need lubrication.
•     Check the power of the device continuously and if it decreases, ask for the reason. The reason for the decrease in the power of the device can be due to the deposition of sand or other materials in the device. Also, check the air source and check the size and model of the hose connectors, moisture in the air pipes and proceed according to the instructions.
•     Do not use a damaged or old impact wrench.
•     When you finish using the device, you should disconnect it from the air source and clean it and then put it in the right place.
•     Place the device in a safe place out of the reach of children